How to Change the IP Address on a Decoder

Video on how to change IP address on ChipX decoder

Start the decoder by connecting it to power and then connect it to the network with a network cable
Press the round button with the ‘.’ sign to confirm that the decoder has received ip address from the network.
Press the arrow button ‘->’ to enter the decoder menu.
Go to ‘network’ > ‘automatic’ and set it to Off.
Check your network range. Visit this link How to check my network ip range for more information about how to check your network ip address
Select an ip address outside your dhcp range and configure in the decoder.
Reboot decoder to apply changes.